6 Channel Full Range Class D Marine Amplifier

NSLM-4200-DSP is a high-performance, four-channel, full-range Class D power amplifier designed for users seeking superior sound quality and flexible tuning. Not only does it offer powerful power output and a wide frequency response, but it also features an advanced built-in digital signal processor (DSP), facilitating professional tuning and personalized sound optimization. It is an ideal choice for modern in-car and multi-channel audio systems. Its four-channel design allows for flexible front and rear speaker configurations, creating an immersive, surround-sounding sound environment to meet the needs of diverse musical styles. It accurately reproduces every detail, from deep bass to crystal-clear highs, ensuring authentic and powerful musical performance. Whether pop, rock, or classical, it delivers flawless performance. The built-in digital signal processor (DSP) provides powerful support for professional tuning. Users and engineers can use the DSP to precisely adjust frequency response, crossover points, delay, and EQ parameters, easily customizing the sound and enhancing the overall listening experience. The addition of DSP adds flexibility and professionalism to audio systems, enabling tuning optimization tailored to suit diverse environments and needs.

NSLM-8200 8-Channel full-range class D amplifier meets users' needs for high power, high definition, and flexible multi-channel configurations. Its superior performance and reliable protection make it an ideal choice for high-end audio retrofits and complex audio systems. Operating at a standard 14.4V voltage, the amplifier delivers 150W per channel into a 4-ohm load and up to 200W per channel into a 2-ohm load, with a total harmonic distortion (THD) below 1%, ensuring pristine sound quality and exceptional dynamics. Its eight-channel design allows users to achieve a richer soundstage, meeting the complex demands of multi-channel surround, front-to-rear soundstage, and multi-driver systems, creating an ultimate listening experience. From deep bass to detailed highs, every detail is fully reproduced, satisfying the most demanding audio quality requirements. The NSLM-8200 supports signal-sensing start, automatically powering on when an audio signal is detected, simplifying operation. Built-in short-circuit, overheating, and overload protection effectively ensure system safety and extend service life.

NSLM-4200 is a high-performance, four-channel, full-band Class D power amplifier designed for in-vehicle and outdoor audio systems requiring high sound quality and high power output in harsh environments. It combines robust power performance with excellent frequency response, robust protection, and intelligent startup control. Its four-channel design allows for flexible front and rear speaker configurations to create a more immersive sound experience, compatible with a variety of vehicle or device audio systems. It boasts IPX4 waterproof performance and utilizes high-quality TE waterproof connectors to effectively prevent moisture and dust intrusion, making it suitable for stable operation in outdoor environments such as motorcycles, boats, and ATVs/UTVs. A built-in triple protection system against short circuits, overloads, and overheating ensures stable and safe operation in extreme environments, reducing the risk of system failure.

NSLBM-2150 is a high-performance, two-channel, full-range Class D car amplifier designed for users who demand powerful sound quality and exceptional protection. Its IPX5 waterproof rating and rugged mechanical construction (ME structure) ensure stable operation in harsh environments, making it ideal for outdoor and in-car audio system upgrades. The NSLBM-2150 delivers 100W RMS power per channel into a 4-ohm load, increasing to 150W RMS into a 2-ohm load, with sub-1% distortion, delivering a clear, rich, and dynamic audio experience, meeting the dual power and sound quality demands of various audio systems. The product features a pre-wired pigtail harness, simplifying installation and reducing wiring complexity. A DIP switch control panel allows for flexible crossover mode selection, and a built-in low-pass filter (LPF) with a selectable 120Hz or 80Hz setting allows users to adjust the frequency response and optimize sound quality based on their speaker configuration.

NSAP-6100 is a powerful and flexible 6-channel Class D car amplifier designed for high-end audio systems. It can simultaneously drive multiple speakers, delivering stable, clear, and dynamic sound. With a total harmonic distortion as low as 1%, it's suitable for both stock system upgrades and professional retrofits. Measuring 283mm (length) x 180mm (width) x 49mm (height), this multi-channel amplifier is compact and suitable for flexible installation in limited spaces. The NSAP-6100 supports multiple input modes, including 2CH/4CH/6CH switching, allowing users to freely configure it to suit their head unit or system configuration, providing maximum system flexibility. An input sensitivity range of 200mV to 6V ensures compatibility with a wide range of audio sources and maintains high audio signal fidelity.

NSTE-4020-BT is a four-channel, full-band Class D power amplifier with integrated Bluetooth receiver. Designed for applications such as motorcycles, electric vehicles, ATVs, and UTVs, where size, durability, and a wireless audio experience are paramount, this amplifier not only delivers efficient and stable amplification but also incorporates wireless connectivity, significantly enhancing ease of use and system integration. Each channel delivers 20W RMS output into a 2-ohm load (within 1% total harmonic distortion). Its high-performance, full-band Class D amplification architecture delivers clear, balanced, and powerful sound, covering the entire 20Hz to 20kHz frequency range and ensuring accurate rendering of musical details. For waterproofing, the product utilizes TE's professional-grade waterproof connectors and achieves IPX4 to IPX5 ratings, ensuring stable and reliable operation in humid, dusty, and even lightly splashed environments. Equipped with a Bluetooth wireless receiver module, users can easily connect their smartphones, tablets, or other Bluetooth devices to the amplifier, allowing them to stream their favorite music without wiring, greatly enhancing operational freedom and entertainment experience.